Caring For Your Hearing Aids - Unitron Quantum Guide

To affix the optional easy-t magnet:
1. Clean the telephone receiver.
Hold the magnet near the
"listening end" of your
telephone receiver and release
it. The magnet will flip to the
appropriate side and seek the
optimal position on the
telephone receiver.
2. Place the double-sided tape in
this optimal position on the
telephone receiver.
3. Attach the magnet to the tape.
Your hearing healthcare professional may also
have set up a phone program that you can
access through the push button on your hearing
aids, or through your optional remote control.
If your hearing aids are configured to work
with the wireless uDirect
accessory, you might benefit from a
®
Bluetooth hands free option. Refer to the
uDirect 2 user guide for more information.
24 ® Bluetooth is a registered trademark of Bluetooth SIG Inc.
1.
2.
3.
™ 2 neck worn

Caring for your hearing aids

Open the battery door when not in use.
Always remove your hearing aids when using
hair care products. The hearing aids can
become clogged and cease to function properly.
Do not wear your hearing aids in the bath or
shower or immerse them in water.
If your hearing aids do become wet, do not
attempt to dry them in an oven or microwave.
Do not adjust any controls. Open the battery
doors immediately, and allow your hearing
aids to dry naturally for 24 hours.
Protect your hearing aids from excessive heat
(hair dryer, vehicle glove box or dashboard).
Regular use of a dehumidifier, such as a
Dri-Aid kit, can help prevent corrosion and
prolong the life of your hearing aids.
Do not drop your hearing aids or knock them
against hard surfaces.
25