Bosch PSR Select Notice Originale page 24

OBJ_BUCH-1564-002.book Page 24 Wednesday, July 10, 2013 3:28 PM
24 | English
hearing protection used for appropriate conditions will reduce personal
injuries.
 Prevent unintentional starting. Ensure the switch is in the off-position
before connecting to power source and/or battery pack, picking up or
carrying the tool. Carrying power tools with your finger on the switch or
energising power tools that have the switch on invites accidents.
 Remove any adjusting key or wrench before turning the power tool
on. A wrench or a key left attached to a rotating part of the power tool may
result in personal injury.
 Do not overreach. Keep proper footing and balance at all times. This
enables better control of the power tool in unexpected situations.
 Dress properly. Do not wear loose clothing or jewellery. Keep your
hair, clothing and gloves away from moving parts. Loose clothes, jew-
ellery or long hair can be caught in moving parts.
 If devices are provided for the connection of dust extraction and col-
lection facilities, ensure these are connected and properly used. Use
of dust collection can reduce dust-related hazards.
Power tool use and care
 Do not force the power tool. Use the correct power tool for your appli-
cation. The correct power tool will do the job better and safer at the rate
for which it was designed.
 Do not use the power tool if the switch does not turn it on and off. Any
power tool that cannot be controlled with the switch is dangerous and
must be repaired.
 Disconnect the plug from the power source and/or the battery pack
from the power tool before making any adjustments, changing acces-
sories, or storing power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
 Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to oper-
ate the power tool. Power tools are dangerous in the hands of untrained
users.
 Maintain power tools. Check for misalignment or binding of moving
parts, breakage of parts and any other condition that may affect the
1 609 92A 0AG | (10.7.13) Bosch Power Tools