Setting The Timer - Dometic FRESHJET FJ 1100 Notice D'utilisation

Dometic FreshJet
9.9

Setting the timer

The timer function allows you to set a specific time period for air conditioning. You
can specify the switch-on time, the switch-off time or both values.
I
NOTE
The remote control returns to its initial mode if no button is pressed on
the remote control for 15 seconds while programming the timer.
➤ Before programming the timer, select the air conditioning mode and all required
values (e.g. temperature).
Setting the switch-on time
➤ Press the
button once.
✓ The ON symbol (
➤ Use the + or – button to set the time when the roof air conditioner is to switch on.
➤ Press the SET button to transmit the value to the roof air conditioner.
✓ The switch-on time is set on the roof air conditioner.
The roof air conditioner is switched on with the selected air conditioning mode
at the specified time.
➤ Switch the roof air conditioner to stand-by.
Setting the switch-off time
➤ Press the
button twice.
✓ The OFF symbol (
➤ Use the + or – button to set the time when the roof air conditioner is to switch off.
➤ Press the SET button to transmit the value to the roof air conditioner.
✓ The switch-off time is set on the roof air conditioner.
The roof air conditioner runs in the selected air conditioning mode until the
specified time.
EN
) flashes on the display of the remote control.
) flashes on the display of the remote control.
Operating the roof air conditioner
35