Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
STEP 10: Hold Glass Tube (G) and insert one side of Glass Tube into Flame Screen (B) until touching the top of
Flame Screen, then Insert another side of Glass Tube (G) into center of Tank Housing (top of Burner Assembly).
NOTE: GLASS TUBE IS A FRAGILE PART, ASSEMBLE GLASS TUBE CAREFULLY AND SLOWLY!
STEP 11: Repeat Step 7 and step 9 to assemble the
last Mesh Guard – Lower (D) and Mesh Guard –
Upper (C).
Replace 4pcs Guard Fastening Plates on the FLAME
SCREEN (B) used 4pcs screws and washers.
STEP 12: Insert & Fix the door to Tank Housing Assembly
(K), then attach the Chain (L) to Burner Assembly (J).
EN
9
Publicité
Table des Matières
