Hendi 272404 Mode D'emploi page 8

STEP 7: Align and insert Mesh Guard – Lower (D) into the inside slots of Support Bar – Lower (F).
Repeat this step to insert 2pcs Mesh Guard – Lower (D).
EN
STEP 9: Same as Step 7 to align and Insert 3pcs Mesh Guard – Upper (C) into the inside slots of 3pcs Support Bar
– Upper (E).
8
Guard Fastening Plate
STEP 8: Unload 4PCS Guard Fastening Plates
by unscrewing 4PCS screws and washers from
FLAME SCREEN (B).