Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6.6 AutoOpen
AutoOpen improves the drying results
with less energy consumption.
While the drying phase
operates, a device opens the
appliance door. The door is
then kept ajar.
CAUTION!
Do not try to close the
appliance door within 2
minutes after automatic
open. This can cause
damage to the appliance.
CAUTION!
In case of presence of
children, the AutoOpen
system can be deactivated if
you want to keep the door
closed in the end of the
cycle.

7. OPTIONS

Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
To improve the drying performance refer
to the XtraDry option or activate
AutoOpen.
How to deactivate AutoOpen
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously Delay and
XtraDry until the indicators
,
and the display is blank.
2. Press XtraDry.
• The indicators
and
are off.
• The indicator
• The display shows the current
setting:
= AutoOpen is
activated (factory setting).
3. Press XtraDry to change the setting.
= AutoOpen is deactivated
4. Press on/off to confirm the setting.
Not all options are
compatible with each other.
If you select non compatible
options, the appliance
automatically deactivates
one or more of them. Only
the indicators of the still
active options are on.
If an option is not applicable
to a programme, the related
indicator is off or it flashes
quickly for a few seconds
and then goes out.
ENGLISH
,
and
start flashing
,
still flashes.
13

Publicité

Chapitres

Table des Matières
loading

Table des Matières