Electrolux ESI8730RAX Notice D'utilisation page 12

12 www.electrolux.com
It is possible to set the released quantity
of rinse aid between level 1 (minimum
quantity) and level 6 (maximum quantity).
Level 0 deactivates the rinse aid
dispenser and no rinse aid is released.
Factory setting: level 4.
How to set the rinse aid level
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously Delay and
XtraDry until the indicators
and the display is blank.
2. Press Delay.
• The indicators
and
• The indicator
• The display shows the current
setting: e.g.
– The levels of rinse aid range
3. Press Delay repeatedly to change
the setting.
4. Press on/off to confirm the setting.
6.4 The rinse aid empty
notification
The rinse aid helps to dry the dishes
without streaks and stains.
The rinse aid is automatically released
during the hot rinse phase.
When rinse aid chamber is empty, the
rinse aid indicator is turned on notifying
to refill rinse aid. If the drying results are
satisfactory while using multi-tablets only,
it is possible to deactivate the notification
for refilling rinse aid. However, for best
drying performance, always use rinse
aid.
If standard detergent or multi-tablets
without rinse aid are used, activate the
notification to keep the rinse aid refill
indicator active.
, and start flashing
,
are off.
still flashes.
= level 4.
from 0A to 6A where level 0A
means no rinse aid is used.
How to deactivate the rinse aid
empty notification
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously Delay and
XtraDry until the indicators
and the display is blank.
2. Press TimeManager.
• The indicators
are off.
,
• The indicator
flashes.
• The display shows the current
setting:
notification is always activated
(factory setting).
3. Press TimeManager to change the
setting.
= the rinse aid empty notification is
deactivated.
4. Press on/off to confirm the setting.
6.5 MyFavourite
This option allows to set and save the
most frequently used programme.
It is possible to save only 1 programme.
A new setting cancels the previous one.
How to save the MyFavourite
programme
1. Set the chosen programme.
It is also possible to set applicable
options together with the programme.
2. Press and hold MyFavourite until the
segments of the programme bar flash
quickly.
How to set the MyFavourite
programme
Press MyFavourite.
• The indicators that are related to
the MyFavourite programme and
options are on.
• The display shows the duration of
the programme.
, and start flashing
,
still
= the rinse aid empty
,
and