Bosch KIF20 Serie Notice D'utilisation page 32

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

en
Fault
The cool-fresh
compartment is too
warm or too cold.
32
Possible cause
The fixed setting has
been set too high
or too low (e.g. if there
is frost in the "cool-
fresh" compartment).
Remedial action
The temperature in the cool-fresh
compartment can be set warmer
and/or colder.
Setting the temperature:
Fig. 2
1. Switch off the appliance with
the On/Off button 1.
2. Simultaneously hold down On/Off
button 1 and temperature setting
button 2 for approx. 2 seconds.
"88" is lit on temperature
display 4. When the temperature
display goes out, release buttons.
3. The temperature levels appear
on the temperature display 4.
Temperature levels:
Setting 0 – coldest setting
Setting 6 – warmest setting
Setting 4 – factory setting
(almost 0 °C)
4. Keep pressing temperature
setting button 2 until the required
temperature level is displayed.
The set temperature is saved after
one minute. The display switches
to the set refrigerator compartment
temperature.
Notes
The numbers on the display do not
correspond to °C temperatures
in the "cool-fresh" compartment.
If the temperature display is not flashing,
the buttons were inadvertently pressed
for longer. Switch off the appliance again
and repeat the process as described
above.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Kif26 serie

Table des Matières