Panasonic DVD-S58 Manuel D'utilisation page 25

Resolution
(DVD-S58 only)
Select a video resolution that is
compatible with the TV display capability.
In 'SYSTEM', press e r to select
1
{Resolution}, then press q.
{Auto}
It detects and selects the best supported
video resolution automatically.
{480P/576P}, {720P}, {1080i}, {1080P}
Select a video resolution that best
supported by the TV. See the TVs manual
for details.
Press e r to select a setting and press
2
OK to confi rm.
HDMI CEC
(DVD-S58 only)
This feature is only applicable when you
connect this DVD player and TV with a
HDMI cable. See Playback features >
Use HDMI CEC protocol (
In 'SYSTEM', press e r to select {HDMI
1
CEC}, then press q.
{On}
Select this to use HDMI CEC protocol.
{Off}
Select this to deactivate HDMI CEC
protocol.
Press e r to select a setting, then press
2
OK to confi rm your selection.
Tips: The underlined option is the factory default setting.
Press w to go back to previous menu item, press SETUP to exit the menu item.
Set the TV Type on the DVD player
according to the TV you have connected.
The format you select must be available
on the disc. If it is not, the setting for TV
display will not affect the picture during
playback.
In 'SYSTEM', press e r to select {TV
1
Type}, then press q.
Press e r select one of the options
2
below:
{4:3 PS}
Select this if you have a normal TV
and want both sides of the picture to
be trimmed or formatted to fi t your TV
screen.
{4:3 LB}
Select this if you have a normal TV. In this
case a wide picture with black bands on
the upper and lower portions of the TV
screen will be displayed.
{16:9}
page 23).
Select this if you have a wide screen TV.
Press e r to select a setting, then press
3
OK to confi rm your selection.
DVD Menu Options
TV Type
25
25