AEG 97015 Mode D'emploi page 27

No. Description
1
Button for selecting the voltage
LM 1.5 Microprocessor Charger:
6 V / 1.5 A or 12 V / 1.5 A
LM 4.0 Microprocessor Charger:
6 V / 2 A or 12 V / 4 A
LD 5.0 Microprocessor Charger:
6 V / 2 A or 12 V / 5 A
LD 7.0 Microprocessor Charger:
6 V / 3.5 A or 12 V / 7 A
2 LD 5.0 and LD 7.0 Microprocessor charger only:
V / A / % button for switching the display (whilst charging, 5 seconds after switching the display will automatically
switch back to displaying the current battery voltage)
V
A
%
3 Comfort plug connection
4 Terminal connection cable (+) with clamp (red)
5 Terminal connection cable (-) with clamp (black)
6 Terminal connection cable (-) with ring lug (black)
7 Terminal connection cable (+) with ring lug (red)
8 Power cable with power plug
9
LED Error red
10 LED Full green
LED Charge orange
11
12
LED Power
13 Mounting option
14 Battery connection cable with on-board outlet comfort connection (accessory, sold separately)
Function
The red LED will light up next to 6 V or 12 V per the selection.
Indicates the battery voltage.
Indicates the charging current.
Indicates the battery charging status in percent.
See "Troubleshooting".
Lights up once the connected battery is fully charged.
Lights up during the charging process.
Lights up whilst the charger is connected to the 230 V mains socket.
English 27