Pressure Adjust Ht/Wt Method; Pressure Adjust Manual Method - Arjohuntleigh First Step Select Manuel De L'utilisateur

Système de remplacement de matelas
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Pressure Adjust HT/WT Method

Use HT/WT pre-set method to set an appropriate air pressure based on patient's height and
weight. HT/WT pre-sets can be adjusted from 2 ft 0 in to 6 ft 8 in by 1-inch increments
and from 50 lb (22 kg) to 300 lb (136 kg) by 5 lb (2 kg) increments.
1.
Press left arrow button under HT/WT. The display shown at right will appear.
• press left arrow button under DeCr to decrease height.
• press right arrow button under InCr to
increase height.
• press center oval button under enter to enter selected weight.
Display shown at right will appear.
• press left arrow button under DeCr to decrease weight.
• press right arrow button under InCr to increase weight.
• press center oval button under enter to enter selected weight.
• press center oval under eXIt to return to Home Display.

Pressure Adjust Manual Method

Use manual method to make major adjustments in existing pressures.
1.
With pressure adjust display showing, press right arrow button under manUaL. Display
shown at right will appear.
• press left arrow button to decrease head section pressure.
• press right arrow button to increase
head pressure.
• press center oval button to enter selected head section pressure. Display shown at
right will appear.
• press left arrow button to decrease body section pressure.
• press right arrow button to increase
body section pressure.
• press center oval button to enter selected body section pressure. Display shown at
right will appear.
• press left arrow button to decrease leg section pressure.
• press right arrow button to increase leg section pressure.
• press center oval button to enter selected leg section pressure. Display shown at
right will appear.
• press center oval button under eXIt to return to Home Display.
i
If HT/WT display is accessed after adjustments have been made using MANUAL, the
MANUAL pressures will automatically be replaced with previous HT/WT pressures.
12
HEAD
SECTION
ADJUST
BODY
SECTION
ADJUST
LEG
SECTION
ADJUST
PRESSURE
ADJUST
HT/WT
EXIT
MANUAL

Publicité

Table des Matières
loading

Table des Matières