Operating Instructions; Loading The Industrial Stapler - Josef Kihlberg F53 Mode D'emploi

6
Fig. 4
Fig. 5
Fig. 6
02.15
OPERATING INSTUCTIONS

6.1 LOADING THE INDUSTRIAL STAPLER

– Always use Josef Kihlberg original staples
JK53-09 or JK53-12.
The correct type of staple is marked on the left side
of the magazine.
– Pull the pusher back and lift up the pusher and the
breech.
– Insert staple strips from the rear.
– Do not overload the magazine. The pusher can be
damaged.
– Release the pusher.
Do not release the pusher directly from
the rear when the magazine is empty,
carefully guide it forward.
Josef Kihlberg F53
7