Table Des Matières; Technical Data - Josef Kihlberg F53 Mode D'emploi

Josef Kihlberg F53
TABLE OF CONTENTS
1 Technical data
2 General information
2.1 Information on environmental protection
3 Safety instructions
4 Description
4.1 Design
4.2 Function
5 Initial operation
5.1 Installation
6 Operating instructions
6.1 Loading the Industrial stapler
6.2 Operating the Industrial stapler
6.3 Control the clinch
7 Preventive and corrective maintenance
7.1 Lubrication
7.2 Cleaning the Industrial stapler
7.3 Removing jammed staples
7.4 Adjustment stapling head bearing
7.5 Adjustment staple clinch
7.6 Replace stapling head
7.7 Replace driver blade or return springs
7.8 Replace feed spring or pusher
8 Trouble shooting
9 Parts list with recommended wear parts
Exploded drawing
10 Parts list - Head HH53/09-12
Exploded drawing
We take sole responsibility for declaring that the in-
dustrial stapler F53, to which this declaration refers,
is in full compliance with the current require-
ments of the guidelines laid down by the council
on 17th May 2006 (2006/42/EG) "Machine
Guidelines".
Complies with norms: ISO 12100:2010
2
1
Page
2
Weight
3
Dimensions
3
4
5
Magazine capacity
5
Staple leg length
5
Throat depth
6
Free anvil height
6
7
7
FASTENERS
8
Staple JK53-09 (3/8")
9
Staple JK53-12 (1/2")
10
10
10
10
11
11
12
12
13
SE JOSEF KIHLBERG AB
14
54
55
56
57
DECLARATION OF CONFORMITY
SE-544 50 HJO, 30.01.2015
Production Manager:
Anders Pettersson
Agent for the publication of technical documentation:
Josef Kihlberg AB, Industrigatan 37B SE-544 50 HJO

TECHNICAL DATA

42 kg (92,6 lbs)
Length 920 mm (36.2")
Width
Height 1350 mm (53.1")
312 staples
09-12 mm (3/8"-1/2")
400 mm (15.7")
860 mm (33,9")
Art.No 400130
Art.No 400132
Industrigatan 37B
SE-544 50 HJO
Telephone: +46 503 328 00
Fax: +46 503 328 01
E-mail: reception@kihlberg.se
Internet: www.kihlberg.com
750 mm (29.5")
02.15