Initial Operation; Installation - Josef Kihlberg F53 Mode D'emploi

Josef Kihlberg F53
5

5.1 INSTALLATION

The Industrial stapler is delivered with the rear foot
disassambled. Assemble as following:
1. Remove the Industrial stapler and the rear foot
from the carton.
2. Assemble the rear foot (Fig. 3/1) and support (3/2)
according to Fig. 3. Tighten the screws.
3. Place the Industrial stapler on level, firm and
cleanworking ground.
6

INITIAL OPERATION

2
Fig. 3
1
02.15