Replace Feed Spring Or Pusher - Josef Kihlberg F53 Mode D'emploi

174032 Frammatarfjäder: Ändra mått 100 till 10
Fig. 17
174032 Frammatarfjäder: Ändra mått 100 till 10
1
Fig. 18
02.15
1
2
2
3
4

7.8 REPLACE FEED SPRING OR PUSHER

1. Remove the stapling head according to chapter
7.6.
2. Remove the roll pin (Fig. 17/1) with a punch with
size 4,9 mm.
3. Remove the circlips (18/1) and disassemble the
breech complete (18/2).
4. Remove the pusher (18/4), feed spring (18/3) and
rollers.
5. Replace defective feeders or spring.
6. Assemble in reverse order.
7. Assemble the stapling head to the machine as
described in chapter 7.6.
8. Adjust the stapling head as described in chapter
7.5.
Josef Kihlberg F53
13