Ribimex Ribiland PRW254A Manuel D'instructions Et D'utilisation page 18

Symbols (explanation of symbol if present on tool)
Warning! Read the instruction manual before operating this machine or prior to carrying any
intervention (e.g. cleaning, maintenance, repair ...) on the tool.
Follow all warnings and safety precautions to avoid a danger
Do not expose to weather conditions (ex.: storm, rain, snow ...) or moisture.
Do not use in damp or wet areas or under the rain.
Do not leave outdoors under the rain.
Caution! Risk of injury and/or damage and/or deterioration of product in case of non-
compliance to safety requirements.
Class II product with double or reinforced insulation
Wear protective equipment: helmet; goggles, ear muffs
Wear protective equipment: ear muff and goggles protection
Wear protective gloves and boots.
Wear appropriate clothing
Keep all body parts (esp hands and feet) away from the cutting device (nylon line).
Injury hazard: moving parts.
Never touch or grab the nylon line when product is at rest or during operation.
It is recommended to wear protective gloves for intervention on tool.
The rotation speed of the cutting element must be greater than the no load speed of the tool.
-1
xxxxxmin
Do not touch.
After intensive use some parts can get hot.
Keep persons (esp. children) and animals away from product and working area. Other
persons and animals should remain at a safe distance of 3 meters or more when the machine
is being used. The operator is solely responsible for third persons in the working area. Stop
tool as soon as someone enters the working area.
Keep persons (esp. children) and animals away from product and working area. Other
persons and animals should remain at a safe distance of15 meters or more when the machine
is being used
Caution! Danger of injury from flying parts!
Warning! Projection hazard (e.g. stones or other objects...)
Keep persons (esp. children) and animals away from product and working area
Noise level. Wear ear protection.
Tool complies with European directives
Keep power cord and/or extension cord away from cutting device and from working track.
Unplug tool immediately from its power supply if the product, the power cord or the
extension cord are damaged or cut during operation. Unplug tool by pulling the plug. Do not
pull the cable.
Disconnect tool from its power supply before proceeding to any maintenance, cleaning or
any intervention on product; before leaving tool unattended or when tool is not used for
prolonged periods of time.
Do not dispose of this product with household rubbish.
Dispose of this product in the nearest recycle centre.
Please contact your local authority or local recycle centre for further information for its safe
disposal.
Page 18 / 45