Abus MODUVIS TVHS20 Serie Manuel D'utilisation page 96

Microphone volume (0~100%):
Door bell volume (monitor) (0~100%):
Conversation volume (10~100%):
Key tone:
Automatic accept:
Do not disturb mode:
Do not disturb:
If you want to reuse an (already existing) door bell, turn to chapter "
" in the section Installation and operating information.
existing doorbell
For information on changing the volume of the video door module, turn to chapter "
the volume on the door video
To record your own ring tones in the monitor, turn to chapter „
the door station monitor".
Set the monitor's microphone volume here.
The higher the percent, the louder (and more
sensitive) the monitor's microphone will be.
Set the monitor's door bell volume here.
Set the desired conversation volume on the
monitor here.
Enables the key tone when typing on the
monitor's touchscreen.
When the function is enabled, the door
intercom immediately accepts a call with the
answering machine.
If the function is disabled, the answering
machine will accept the call automatically after
the set call duration.
Indoor station:
Allows calls from door stations and extension
monitors. Calls from other apartments will not
be allowed. To allow calls from apartments,
please set the "do not disturb" function to
"disabled".
All:
All calls will be rejected. (Calls from door
station, extension monitor or other apartment)
Disabled, all day, time schedule (daily from/to
hour/minute). Determines the time of day
during which the "Do not disturb" function is
active.
module (TVHS20000, TVHS20010)".
31
9.5 Connecting an
9.9 Plays your own ring tones in
9.4 Adjusting