Configuration - Default Settings; Relay Configuration - Abus MODUVIS TVHS20 Serie Manuel D'utilisation

Configuration – default settings
5.2.4.4
Default settings:
Factory settings:
5.2.4

Relay configuration

Relay 1
Duration
Interval
Relay 2
Under "Relay configuration", the two monitor relays themselves are configured. The configuration
in this menu has no impact on the video door module relay.
The relay outputs are on the back of the monitor and can be connected via the enclosed splitter
cable. The assignment is printed on the back of the monitor.
The relay 1 is switched between COM1 and NO1, relay 2 is connected to COM2 and NO2.
Button/display
Relay 1
Duration
Interval
Relay 2
For more information, read chapter "
station monitor" and
"
9.5 Connecting an existing doorbell
Resets the monitor to default settings. It will still be activated and
the password will remain the same.
Completely resets the monitor including password to factory
settings. The monitor will then be in "inactive" status.
Relay configuration
Description
Activates/deactivates
additional (or already existing) doorbell. The
relay 1 on the monitor is triggered in parallel to
a call.
Determines how long the relay for the
additional doorbell is triggered when pressed.
Determines the interval in which the relay is
triggered for the set "duration" of the additional
doorbell when pressed.
Activates/deactivates the additional switching
output on the monitor (e.g.: for a door opener
on the front door of the respective floor). If the
function is enabled, another "key symbol"
labelled "3" will appear on the local monitor.
9.6 Connecting existing door openers to
" in the section Installation and operating information.
40
3s
5s
the function for
the door
an