Abus MODUVIS TVHS20 Serie Manuel D'utilisation page 124

Volume Input / Audio parameter settings for video door
Output module. (See Installation and operating
information)
ial Determines the apartment assignment for
D
the call button on the door video module
itself. A "1" will be under "room no." as
standard from the factory. This means the
monitor is called with apartment number 1.
Motion Motion detection setting in connection with
Detection ABUS NVR. (Please only set up and
configure the motion detection directly via
ABUS NVR)
Intercom Not used
Protocol
Sub Module Overview of connected extension modules
e.g.: TVHS20020, TVHS20030,
TVHS20040
Local NetCfg IP address of video door module. (IP
address, subnet mask, standard
gateway)
Port: 8000 is needed to connect to an
ABUS NVR
http Port is not needed as there is no web
interface
Menu item is not used on a main video
inked
L
door module.
Network
Configuration
Main Outdoor IP Address: Is used to
assign the main door station to a back
door. (See Installation and operating
information)
FTP
Configuration
Advanced Configuration of DNS server address for
Settings door video module
Video Settings for image parameters (brightness,
Parameter contrast, saturation)
Video Display Settings for OSD display (camera name,
date, time, text position)
Video&Audio Stream parameter settings for video door
module camera. Attention: We do not
recommend modifying settings.
Back Light BLC function options for compensating for
Compensation back light.
59
"Network" section
Not used
"Display" section