Abus MODUVIS TVHS20 Serie Manuel D'utilisation page 125

Remote configuration "Monitor TVHS20200, TVHS20210":
Information such as "firmware", "serial
Device
Information number" etc.
General Device name and device ID (not relevant
for door intercom system)
Time Settings for date/time, summer time and
NTP server
Maintenance Maintenance menu for firmware update,
set factory settings and restart device
User Not used
RS485 Not used
Selection of apartment numbers in "Indoor
D
I
station" mode (main monitor)
Configuration
In "Station Extension" mode (extension
monitors), the number of the extension
monitor is configured.
Note: The "main monitor" or "extension
monitor" mode is typically selected and the
numbers assigned through the menu on
the respective monitors. (e.g.: In setup
process via installation wizard)
Time Settings for call duration, live image
Parameters display time, call forwarding delay, ring
tone duration.
Note: These settings can also be changed
directly in the monitor's menu.
ermission Is not used in the monitor's remote
P
configuration.
Password
Zone Alarm Not used
P camera Add ABUS network cameras. (See
I
compatibility list) Up to 16 ABUS network
information
cameras can be added and watched live.
(Camera cannot be played back or
configured directly from the door station)
Volume Input/ (See Installation and operating
Output information)
Ring Import Manage own ring tones (See Installation
and operating information)
Deploy Info Not used
Incoming Call Not used
Linkage
Not used
elay
R
60
"Intercom" section