Setting And Starting A Washing Programme; Interrupting A Washing Programme; Cancelling A Washing Programme; Setting And Starting A Washing Programme With Delay Start - AEG FAVORIT 55010 VI Notice D'utilisation

Setting and starting a washing programme

Set the washing programme with the door ajar. The washing programme starts only after
you close the door. Until then it is possible to modify the settings.
Do these steps to set and start a washing programme:
1. Switch on the appliance.
2. Make sure that the appliance is in setting mode.
3. Press one of the programme buttons. Refer to the chapter 'Washing programmes'.
– The programme indicator light comes on.
– The digital display shows three horizontal bars.
4. Close the door.
– The washing programme starts automatically.
– The digital display shows only one horizontal bar. It remains for all the duration of
the washing programme.
When the washing programme operates, you cannot change the programme. Cancel the
washing programme.
WARNING!
Only interrupt or cancel a washing programme if necessary.
CAUTION!
Open the door carefully. Hot steam can come free.

Interrupting a washing programme

Open the door.
• The programme stops.
Close the door.
• The programme continues from the point of interruption.

Cancelling a washing programme

1. Press and hold function buttons B and C until:
– All the programme lights come on.
– The digital display shows three horizontal bars.
2. Release function buttons B and C. The washing programme is cancelled.
At this time you can do these steps:
1. Switch off the appliance.
2. Set a new washing programme .
Fill the detergent dispenser with detergent before you set a new washing programme.

Setting and starting a washing programme with delay start

1. Switch on the appliance.
2. Make sure that the appliance is in setting mode.
3. Set a washing programme.
4. Press the delay start button until the display shows on flashing the necessary delay
start of the washing programme.
Setting and starting a washing programme
45