What To Do If - AEG FAVORIT 34030VI Notice D'utilisation

WHAT TO DO IF...

The appliance does not start or stops during operation.
First try to find a solution to the problem (refer to the chart). If not, contact the service
centre.
Malfunction
The appliance
does not fill
with water.
The appliance
does not drain
the water.
The anti-flood
device operates.
The programme
does not start.
Fault code
• The light of the pro-
gramme in progress
flashes.
• The end-of-programme
indicator light flashes 1
time.
• The light of the pro-
gramme in progress
flashes.
• The end-of-programme
indicator light flashes 2
times.
• The light of the pro-
gramme in progress
flashes.
• The end-of-programme
indicator light flashes 3
times.
Possible cause
The water tap is
blocked or is furred
with limescale.
The water pressure is
too low.
The water tap is closed.
The filter in the water
inlet hose is blocked.
The connection of the
water inlet hose is not
correct.
The water inlet hose is
damaged.
There is a blockage in
the sink spigot.
The connection of the
water drain hose is not
correct.
The water drain hose is
damaged.
The appliance door is
open.
43
What to do if...
Possible solution
Clean the water tap.
Contact your local wa-
ter authority.
Open the water tap.
Clean the filter.
Make sure that the con-
nection is correct.
Make sure that the wa-
ter inlet hose has no
damages.
Clean the sink spigot.
Make sure that the con-
nection is correct.
Make sure that the wa-
ter drain hose has no
damages.
Close the water tap
and contact the service
centre.
Close the door correct-
ly.