Understanding The Status Indicators - Whirlpool 920 Serie Guide D'utilisation Et D'entretien

SETTI NG T HE C O N T R O L S

Understanding the status indicators

Lock Out
The Lock Out feature lets you lock out the
LOCK OUT LOCK OUT
To use Lock Out:
•
Press and hold Air Dry (about 5 seconds)
until the Lock Out indicator glows.
To turn off Lock Out:
•
Press and hold Air Dry (about
AIR DRY AIR DRY
5 seconds) until the Lock Out
indicator turns off.
Washing
The Washing indicator glows at the start
WASHING
Water Heating
The Water Heating indicator glows whenever
WATER HEATING WATER HEATING
16
function of the control
pads. When using Lock
Out, you cannot start
the dishwasher.
of the first fill of any cycle
(except Rinse/Wash
Later) and remains on
until the end of the main
wash.
water is heated during a
cycle.
Rinsing
The Rinsing indicator glows during the last
two rinses of all cycles.
RINSING
Drying
The Drying indicator glows during the
drying portion of each
DRYING
cycle – even if you select
Air Dry. It turns off at the
end of the cycle. If
dishes are not as dry as you expected when
using Air Dry, either allow longer drying
times (overnight) or do not use Air Dry.
Clean
The Clean indicator glows at the end of a
cycle to show that the
CLEAN
load is clean. All other
indicators turn off. The
Clean indicator glows
until you press Cancel/Drain or any other
control pad.