Understanding The Status Indicators - Whirlpool 927 Serie Guide D'utilisation Et D'entretien

S ETT I NG T H E C ONT R OL S

Understanding the status indicators

Lock Out
The Lock Out feature lets you lock out the
LOCK OUT LOCK OUT
To use Lock Out:
• Press and hold Air Dry (about 5 seconds)
until the Lock Out indicator glows.
AIR DRY AIR DRY
To turn off Lock Out:
•
Press and hold Air Dry (about 5 seconds)
until the Lock Out indicator turns off.
Washing
The Washing indicator glows at the start of
WASHING
Water Heating
The Water Heating indicator glows whenever
WATER HEATING WATER HEATING
18
function of the control
pads. When using Lock
Out, you cannot start
the dishwasher.
the first fill of any cycle
(except Rinse/Wash
Later) and remains
on until the end of the
main wash.
water is heated during a
cycle.
Rinsing
The Rinsing indicator glows during the last
2 rinses of all cycles.
RINSING
Drying
The Drying indicator glows during the drying
portion of each cycle –
DRYING
even if you select Air Dry.
It turns off at the end of
the cycle. If dishes are
not as dry as you expected when using Air
Dry, either allow longer drying times (over-
night) or do not use Air Dry.
Clean
The Clean indicator glows at the end of a
cycle to show that the
CLEAN
load is clean. All other
indicators turn off. The
Clean indicator glows
until you press Cancel/Drain or any other
control pad.