How To Replace The Batteries - LD Systems ROADMAN 102 Manuel D'utilisation

Masquer les pouces Voir aussi pour ROADMAN 102:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 46
HANDLING OF THE BATTERY:
Before you use your device for the first time the battery should be charged for 12 hours.
When the battery is low, the LED will glow red, when the battery is charging it will flash green.
To charge the battery simply connect the device with the power voltage cable to the AC Current.
This device is equipped with two 12 V4.5AH batteries. They can be used and recharged around 500 times, depen-
ding on the use and care.
The batteries should be charged 8 hours long. If the device stays for a long time unused make sure that you char-
ge the battery once every 3 month or at least before the next use.

HOW TO REPLACE THE BATTERIES

1. Make sure that the device is turned off and not connected to the power voltage
2. Unscrew the bottom panel to access the battery storage
3. Disconnect old batteries and connect the new ones. Make sure to respect the +/- order (Red + // Black -).
4. Place the new batteries in the battery storage and screw the bottom panel back.
5. Charge the new batteries at least 12 hours.
AT THE BOTTOM YOU CAN FIND THE BATTERY
STORAGE
17
17

Publicité

Table des Matières
loading

Table des Matières