Sony VPL-CX75 Mode D'emploi page 34

Masquer les pouces Voir aussi pour VPL-CX75:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Note
Note that if the projector is used for profit or for public viewing, modifying the original picture by
switching to the wide mode may constitute an infringement of the rights of authors or producers,
which are legally protected.
About the Preset Memory No.
This projector has 45 types of preset data for input signals (the preset memory). When a
preset signal is input, the projector automatically detects the signal type and recalls the
data for the signal from the preset memory to adjust it to an optimum picture. The memory
number and signal type of that signal are displayed in the INFORMATION menu (See
page 40). You can also adjust the preset data through the INPUT SETTING menu.
This projector has 20 types of user memories for INPUT-A into which you can save the
setting of the adjusted data for an unpreset input signal.
When an unpreset signal is input for the first time, a memory number is displayed as 0.
When you adjust the data of the signal in the INPUT SETTING menu, it will be registered
to the projector. If more than 20 user memories are registered, the newest memory always
overwrites the oldest one.
See the chart on page 52 to find if the signal is registered to the preset memory.
Since the data is recalled from the preset memory about the following signals, you can use
these preset data by adjusting "H Size." Make fine adjustment by adjusting "Shift."
Signal
Super Mac-2
SGI-1
Macintosh 19"
Macintosh 21"
Sony News
PC-9821 1280 × 1024
WS Sunmicro
Note
When the aspect ratio of input signal is other than 4:3, a part of the screen is displayed in black.
34
GB
The INPUT SETTING Menu
Memory No.
23
23
25
27
36
36
37
SIZE
1312
1320
1328
1456
1708
1600
1664

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Vpl-cx70

Table des Matières