Using Multiple Programmes; Automatic Programme - SilverCrest SMWC 700 B3 Instructions D'utilisation Et Consignes De Sécurité

In the following list you can find the approximate
defrosting time needed for different weights:
Weight
100 g
500 g
1000 g
1500 g
2000 g
Press the start button
programme.
If necessary, open the door
half of the elapsed time. Turn the food over or
stir it in order to guarantee that it defrosts evenly.
Then close the door
Start button
12
If the food has still not defrosted after the elapsed
time, start the process again. To do this, use the
power level P30 for a few minutes in order to
fully defrost the food.

Using multiple programmes

The product can perform multiple programmes in
succession. It is possible to choose 2 programmes
which will automatically run.
The quantities can be set according to the following table:
Programme
A-1 heat up
A-2 vegetables
30 GB/IE
Time
approx. 4 minutes
50 seconds
approx. 25 minutes
approx. 50 minutes
approx. 75 minutes
approx. 95 minutes
to start the
12
after around
9
again and press the
9
to resume the program.
Weight
200 g
400 g
600 g
200 g
300 g
400 g
Set the programmes, and after you have set the
final programme, press the start button
Example:
You want to defrost food using a defrost programme
and then start the cooking programme P50.
Set the defrost programme as described in the
chapter "Defrost programme", but do not press
the start button
Set the programme P50 as described in the
chapter "Cooking programme".
Finally, press the start button
programmes. Both programmes run in succession.

Automatic programme

For automatic programmes, it is not necessary to set
the cooking time or the energy level. The product
automatically determines the values depending on
the entered food and weight.
Turn the rotary control
gramme number appears in the display
(e.g. "A-1" for automatic programme 1).
Choose an automatic programme from 1 to 8.
The corresponding symbol will flash in the dis-
play .
2
Press the start button
selection.
Now select the desired weight. To do this, turn
the rotary control
13
size is shown. The weight / the quantity will be
shown in the display
Display
200
400
600
200
300
400
to complete.
12
to start the
12
clockwise. A pro-
13
2
to confirm the
12
until the desired portion
.
2
Power
700 W
700 W
.
12