Scan Setting; Saving Fm Stations To A Memory Slot; Retrieving Fm Stations From A Memory Slot; Overwriting/Deleting A Station Memory Slot - TechniSat TECHNIRADIO SOLAR Mode D'emploi

The display shows the frequency in steps of 0,05 MHz. Next increases the
transmission frequency, Prev reduces it.

8.5 Scan setting

In this menu item it is possible to set the sensitivity of the scan.
> Keep the Menu button pressed and use the Next/Prev. button to select the
item [Search settings]. Press Select.
> Select whether the scan should only stop for stations with a strong signal
[Strong Stations Only] or for all stations (including stations with a weak
signal) [All Stations].
With the All Stations setting, the scan stops automatically upon detecting
each available station. This can result in weak stations being played with
background noise.
> Select an option with Next/Prev. and press the Select button to save the
setting

8.6 Saving FM stations to a memory slot

The station memory can save up to 10 stations in the FM range.
> First set the desired station frequency (Section 8.3, 8.4).
> In order to store this station on a memory slot, hold down the Preset button
during playback until [Save station]. Then use the Next/Prev. button to select
a station memory slot (1 - 10). Press Select to save.
> Repeat this process to save additional stations.

8.7 Retrieving FM stations from a memory slot

> To retrieve a station that you have stored in the FAV memory, briefly press the
Preset button and select a station slot (1-10) using the Next/Prev. button.
Press Select to play the station.
If no station is saved on the selected station slot, [(empty)] appears on the
display.

8.8 Overwriting/deleting a station memory slot

> Simply save a new station on the respective memory slot as described.
When retrieving the factory settings all memory slots are deleted.
DE
EN
FR
IT
NL
PL
CZ
47