Switch Functions; Logo Placement - Napoleon GDS25N Instructions D'installation Et D'opération

28
EN
Place the hole in the underside of log #2
B.
onto the locating screw, on the left side of the
burner. The fi bre burner is formed to cradle
the centre of the log.

5.5.1 SWITCH FUNCTIONS

5.6

LOGO PLACEMENT

Remove the backing from the logo and position onto the control door as shown.
W415-1332 / A / 11.21.14
C.
D.
MAIN
BURNER
SWITCH
FAN
CONTROL
1/2"
LOGO
1/2"
Place the hole in the underside of log #3 onto
the locating screw, on the right side of the
burner. The bottom branch of log #3 sits in
front of, and against, the right end of log #2.
Reinstall the glass door & front.
ACCENT
LIGHT
SWITCH