Klein Tools CL320 Manuel D'instructions page 14

ENGLISH
CAPACITANCE
1. Insert RED test lead into VΩµA jack
into COM jack
Continuity/Resistance/Capacitance/Diode-Test
NOTE: The meter defaults to Continuity testing in this mode. Press
the "SELECT" button
The Capacitance icon
should read 0 nF with test leads open.
2. Remove power from circuit.
3. Measure capacitance by connecting test leads across the
capacitor. The meter will auto-range to display the measurement
in the most appropriate range.
Black lead
14
OPERATING INSTRUCTIONS
, and rotate function selector switch
4
twice to enter Capacitance testing mode.
12
will appear on the display. The meter
Red lead
, and BLACK test lead
5
to the
2
setting.