Arexx BS-1400GPRS Mode D'emploi page 73

Can we use the sensor data for our own software?
Yes, check the documentation for data access at START > ALL PROGRAMS >
Temperature Logger > Help > Server Interface Help. The BS-XXXX will also
allow the use of messenger functionality. Apart from these options, you may also
use the cdata.xml page to output the most recent sensor data in xml format.
Can we display the BS-XXXX sensor data in the Web?
You may also use www.multilogger.nl as a structured logger for a number of
sensors.
And for the specialists: set up your own webserver....
Is it possible to receive my BS-XXXX data at my laptop as well?
Yes, there are several ways to do so:
(1) directly via USB, or
(2) alternatively using the synchronisation functionality (see the next question),
(3) by applying a webserver.
Is it possible to display this information at several PC's or laptops?
Yes, by using the sync file configuration tool. The synchronisation functionality of
the logger software allows you to split up data for several PC's or join data from
different sources. The system allows the usage and cooperation of several
BS-XXXX. The http-protocol is used for communication. There is also a Wizard
in the "SyncFileConfig" TOOL.
How do I set up the system to display data at several laptops/PC's?
Use the Sync file config tool in the tool menu of the logger software. The most
simple strategy is to link a BS-XXXX to the PC (by a network link) and to ex-
pand the system from this core system. Connecting the BS-XXXX is simplified
by using the BS-XXXX wizard, in which the logger software is configured - to be
followed by an upload of the rule file to the BS-XXXX.
SYNCFILE CONFIG TOOL
The sync file config tool generates an xml-file, describing the data-sources for
the logger-software and a description of possible addressees for the sensor
data, to which the logger-software is to send the data.
For further information see the Synchronization_Configuration_Tool.pdf
73