Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
BS-XXXX communicating to a PC and an external website
This configuration may be used to send Bsxxxx data to a PC in a
network and simultaneously to a Multilogger website.
To setup connection the following steps are required:
1. Follow the section of steps at the first sample installation (in which
the Bsxxxx data are to be sent to a PC in a local network)
2. Open the syncConfig tool in the Multilogger software and select the
menu extra->'generate rulefile for Bsxxxx'. Save this Rulefile at a
suitable PC location.
3. Proceed by following the steps in the second sample installation (in
which the BSxxxx data are to be sent to a Multilogger website).
NOW PAY ATTENTION! Don't upload the rulefile directly to the
BS-xxxx.
4. Open the Ruleeditor tool at the Multilogger software
5. In thee Ruleeditor open the file you had created in step 2.
6. Select the File->Add menu in the Ruleeditor and select the
Multilogger rulefile you had saved at the PC in step 3.
7. Save the assembled Rulefile and upload this file to the BS-xxxx.
Uploading may be performed by directly addressing the BS-xxxx or
by selecting menu extra-> upload to Bsxxxx
Wizzard BS1000 Settings
Wizard PC Settings
56
Multilogger.nl
Website
E
N
G
L
I
S
H
Publicité
Table des Matières
