Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Mode D shows the result codes from the rules executed.
The first column shows the rule number, the second column the device id,
the third column is the time of execution and the fourth column is the result-
code of the rule. Generally the result code is derived from the receiving
server. A http request will return 200 when ok, a SMTP server will return 250
when the email is queued successfully.
Mode E shows the model and firmware version, the actual date and
time, and the actual general setting-values.
The setting-values can be changed by the BS-1200 configuration tool.
graph: the time between 2 data points in seconds. There are 24 data points
shown per graph. This value defines the total time-span of the graph.
E
beep: duration of the buzzer in seconds. The buzzer will turn on when an
alarm is set and turn off when the user presses button (1) or (2), or when
N
the buzzer is active for more than this duration.
G
scrn: display time-out in seconds. If no button is pressed, the display will
turn off after this period of time.
L
rpt: repeat alarm time in seconds. The alarm is repeated after this period of
I
time if the alarm was left unconfirmed.
S
Mode F shows the GSM status.
The first line displays the general status of execution:
H
-idle, http, smtp, sms etc
The second line shows the PIN status: accepted (ok), error
The third line shows the name of the actual telecom-network operator.
Mode G displays the SD card status.
The total size of the card, and the free space on the card.
51
Publicité
Table des Matières
