Klein Tools MM600 Manuel D'utilisation page 16

ENGLISH
TEMPERATURE
1. Insert K-type thermocouple with adapter into the V
jacks (observe polarity markings on thermocouple and meter), and
rotate function selector switch
NOTE: The meter defaults to Fahrenheit scale in this mode. To enter
Celsius scale, press the "SEL" button
appropriate icon (either °F or °C ) appears on the display. Default
temperature scale may be changed by powering on the meter with
the "HOLD" button
2. To measure temperature, make contact between the
thermocouple tip and the object being measured. When
thermocouple tip and object are in thermal equilibrium, the
measurement on the display will stabilize. The meter will auto-
range to display the measurement in the most appropriate range.
Remove thermocouple before switching meter to other
measurement functions.
The thermocouple included with the original purchase
is suitable for temperatures below 356°F / 180°C only. To
measure higher temperatures, a K-type thermocouple
with the appropriate measurement range should be used.
16
OPERATING INSTRUCTIONS
2
depressed.
11
Adapter
RED Probe
BLACK
K-Type
Thermocouple
with Adapter
to the Temperature
once. Ensure that the
11
and COM
5 4
setting.