After Storage; General Information; Warranties (For U; Identification Number Location - Suzuki DF4 Manuel Du Propriétaire

9. Apply a coat of automotive wax on the
external finish of the motor. If paint damage
is evident, apply touch up paint before wax-
ing.
10. Store the motor in an upright position in a
dry, well-ventilated area. Select an area
with constant temperature to avoid corro-
sion caused by condensation. Do not store
next to furnaces, heaters, etc.
 WARNING
When the engine is running, there are
many moving parts that could cause
severe personal injury.
When the engine is running, keep your
hands, hair, clothing, etc., away from the
engine.
NOTICE
Severe engine damage can occur in as lit-
tle as 15 seconds if the engine is started
without supplying water to the cooling
system.
Never start the motor without supplying
water to the cooling system.

AFTER STORAGE

When taking your motor out of storage, follow
the procedure below to return it to operating
condition:
1. Thoroughly clean the spark plugs. Replace
them if necessary.
2. Check the gear-case oil level and if neces-
sary, add gear oil according to the procedure
outlined in the GEAR OIL section.
3. Lubricate all moving parts according to the
LUBRICATION section.
4. Check the engine oil level.
5. Clean the motor and wax the painted sur-
faces.

GENERAL INFORMATION

WARRANTIES (For U.S.A)
The warranties covering your outboard motor
are explained in a separate Limited Warranty
booklet given to you at the time of sale. Please
read this booklet carefully so you can under-
stand your rights and responsibilities.

IDENTIFICATION NUMBER LOCATION

The model and identification numbers of your
outboard motor are stamped on a plate
attached to the clamp bracket. Record these
numbers below for future reference. It is impor-
tant to know these numbers when you place a
parts order or if your motor is stolen.
Model Number:
Identification Number:
47