Motor Transporting - Suzuki DF4 Manuel Du Propriétaire

10. To carry, hold the motor by gripping the
swivel bracket and rear handle.

MOTOR TRANSPORTING

When transporting the motor, place the motor
either vertically or horizontally.
Vertical transport:
Raise the tiller handle and attach the clamp
bracket to a stand by securing two clamp
screws.
34
Horizontal transport:
Raise the tiller handle and rest the motor on a
case protector with the port side downwards as
shown.
NOTICE
If you do not take proper precautions
when transporting your outboard, it can
be damaged.
• Do not rest the engine in any of the
positions shown below, as water may
enter the cylinder from the sump or the
outer casings may be damaged.
• Do not place the engine on its side
before the cooling water has drained
from it completely, as water may enter
the cylinder through the exhaust port
and cause problems.
INCORRECT