Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ENGINE OIL

 WARNING
Never perform any ENGINE OIL proce-
dure with the motor running, as serious
injury can occur.
The motor must be shut off before any
ENGINE OIL procedures are performed.
NOTICE
Extended trolling can reduce oil life. Your
engine may be damaged if you do not
change engine oil more frequently under
this type of use.
Change your engine oil more frequently if
your engine is used for extended trolling.
Engine oil change
The oil should be changed when engine is
warm so that the oil will drain thoroughly from
the engine.
To change the engine oil:
1. Place the motor in a vertical position and
remove the motor cover.
2. Remove the oil filler cap.
40
3. Fully steer the motor to the starboard side.
4. Place a drain pan under the engine oil drain
plug.
 CAUTION
The engine oil temperature may be high
enough to burn your fingers when the
drain plug is loosened.
Wait until the drain plug is cool enough to
touch with bare hands before removing it.
5. Remove the engine oil drain plug and gas-
ket, then let the engine oil drain.
6. After draining, secure the engine oil drain
plug with a new gasket.
NOTICE
A previously-used gasket may leak,
resulting in engine damage.
Do not re-use gaskets. Be sure to always
use new gaskets.
7. Fill with recommended engine oil to the
upper level.
Oil capacity: 0.7 L (0.74/0.62 US/Imp qt)
Engine oil: SAE (or NMMA FC-W) 10W-40
API (or NMMA FC-W) Classifica-
tion SG, SH, SJ, SL, SM

Hide quick links:

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Df6

Table des Matières