Publicité
Display
Malfunction
F2
The electronic system has
overheated and the
corresponding hotplate
has been switched off.
F4
The electronic system has
overheated and all the
hotplates have been
switched off.
Do not rest hot pans on the control panel.
F8
The hotplate has been on
for too long and has
switched off.
24
Measure
Wait until the electronic system has cooled down
completely. Then press any symbol on the hob.
If the indication continues, notify
the Technical Assistance Service.
Wait until the electronic system has cooled down
completely. Then press any symbol on the hob.
If the indication continues, notify
the Technical Assistance Service.
The hotplate can be switched on again straight away.
Publicité
