Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
USING THE SPIRALIZER ATTACHMENT
ATTACHING THE SPIRALIZER TO THE STAND MIXER
For Stand Mixers with a hinged attachment hub cover: Flip up to open.
1
For Stand Mixers with a removable attachment hub cover: Turn the attachment
knob counterclockwise to remove attachment hub cover.
Insert the Spiralizer attachment
shaft housing into the attachment
hub, making certain that the power
shaft fits into the square hub socket.
2
Rotate the Spiralizer attachment
back and forth, if necessary. The pin
on the shaft housing will slip fully
into the notch on the hub rim when
it's in the proper position.
6 | USING THE SPIRALIZER ATTACHMENT
Tighten the attachment knob
until the Spiralizer attachment is
completely secured to the Stand
3
Mixer. Visit kitchenaid.com/quickstart
for detailed information on how to
use your Spiralizer's different blades
and features.
Publicité
Table des Matières
