Typical Frequency Response Curves - Chauvin Arnoux E1N Notice De Fonctionnement

Typical noise level at the output (RMS values)
Frequency band
1 mV/A range
1 V/A range
DISTORTION QUANTITIES
- Position of the conductor in the jaws : 0.5% of the reading (max) for a conductor
moved from one end of the window to the other.
- Temperature :
1500ppm/°C + 60mA/°C (max) for a temperature between 0°C and 10°C.
1000ppm/°C + 60mA/°C (max) for a temperature between 10°C and 50°C.
- Load : 0.1% of the reading (max) for a load between 2kΩ and 10kΩ on the 1mA/V range
and 2% of the reading (max) for a load of between 10kΩ and 100kΩ.
- Frequency : See curves below.

TYPICAL FREQUENCY RESPONSE CURVES

Range 1mV/A at 10A and 20A
I
phase error in ° at 10A AC
phase error in ° at 20A AC
DC - 1 Hz 1 Hz - 10 kHz
3 µV 10 µV
3 mV 10 mV
Frequency
17
10 kHz - 100 kHz
18 µV
18 mV