Remove And Replace Clean Water Solution Tank - Dirt Devil FD50100 Guide D'utilisation

REMOVE AND REPLACE CLEAN WATER
SOLUTION TANK
1. Press the Clean Water
Tank latch.
12
2. Tip it out like this.
WARNING
To reduce the risk of fire and electric shock due to internal component damage, use only Dirt
Devil brand cleaning fluid intended for use with this appliance. See Cleaning Fluid Section for
recommended solutions.
3. Unscrew measuring
cap from the back.
5. Fill remaining Clean Water
Solution Tank with hot tap
water to desired fill line.
Tightly screw cap back on.
4. Add up to 4 capfuls of
Dirt Devil Solution into
the Water Solution Tank.
= 4 capfuls
= 3 capfuls
= 2 capfuls
6. Place the Clean Water
Solution Tank back in
bottom first. It will click.
13