Dirt Devil FD50100 Guide D'utilisation page 5

HANDLE
RELEASE
PEDAL
POWER
PLUG UNIT IN. STEP ON
THE HANDLE RELEASE
PEDAL AND PULL BACK
ON THE UPPER HANDLE.
THEN STEP ON THE
POWER BUTTON TO
TURN ON.
8
PULL TRIGGER TO
SPRAY SOLUTION WHILE
MOVING FORWARD.
THEN SLOWLY RELEASE
THE TRIGGER AND PULL
YOUR CARPET WASHER
BACK TO REMOVE DIRTY
WATER AND SOLUTION.
CAUTION
Never leave unit unattended with power on. Turn OFF when emptying and filling tank. Do NOT oversaturate the carpet.
If the sound of the motor changes to a high pitch, this indicates the dirty water tank is full and must be emptied.
EMPTY CLEAN WATER
SOLUTION TANK AND
REFILL WITH CLEAN
WATER. REPEAT STEP
6 WITH JUST CLEAN
WATER FOR RINSING.
EMPTY DIRTY WATER
TANK WHEN FULL.
YOUR
CARPET
IS FRESH
AND CLEAN!
NEED HELP?
Go to dirtdevil.com/support or
contact our Customer Service
Department at (800) 321-1134
8:00 a.m. - 7:00 p.m. EST Mon. - Fri.
or Sat. 10:00 a.m. - 6:00 p.m. EST.
Pick up the conversation on...
Facebook.com/DirtDevil
Twitter@DirtDevil
9