Empty The Dirty Water Tank; Important; Place Dirty Water Tank In Base Of Cleaner - Dirt Devil FD50100 Guide D'utilisation

EMPTY THE DIRTY WATER TANK

1. Pull the latch to release.
3. Pull lid out and
empty like this.
14
2. Hold the handle and pull
tank up and out.
4. Rinse the tank and
filter with hot tap water.
Wipe and let dry before
storing to prevent
mildew. Replace the
dirty water tank lid.

IMPORTANT

You will hear a noticeable change in the pitch of
the cleaner. This indicates a need to empty the
dirty water tank.
PLACE DIRTY WATER TANK IN
BASE OF CLEANER
1. Place carpet cleaner
on a flat surface.
3. The nozzle should be
flush with the base. If
it's not, this will result
in poor water pickup.
WARNING
To reduce risk of personal injury -
unplug cleaner before servicing. Do
not use any chemicals when cleaning.
2. Hook the front of the
tank into the base.
Make sure the tabs on
the bottom of the tank
are latched.
4. Now place the rear
of the tank into the
base of the cleaner.
Push handle down
until it clicks.
15