Specific Usage - DPI Sekur C607 Serie Manuel D'utilisation Et D'entretien

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

C607 TP
C607 SP/A TP
C607 MD
C607 TWIN
C607 SELECTA
C607 CL3 (*)
(*) formerly C607 F
The CE marking "CE 0426" on the mask facepiece indicates the notified body carrying out
the production control as provided in annex VIII (module D) of the European Regulation
2016/425 - Italcert - Viale Sarca, 336 - 20126 Milano - Italy (Notified Body n. 0426).
Full face mask with negative or positive pressure, are personal protective device for
breathing protection, that combined respectively with filters or respirators, provide
breathable air to the user.
The instructions for use of filters and respiratory equipment, as well as the safety
standards and regulations issued by the competent authority, must be strictly followed.
Respiratory protective devices must be used by personnel in good health and trained in
the use of this kind of equipment. Users must be beardless and without sideboards or
moustaches as these interfere with the facepiece seal, thus impeding adequate seal
tightness on the face. The users of C607 masks must ensure that the highest
concentrations of contaminants in the atmosphere are not exceeded. The permissible
exposure limits are indicated in the manual containing the instructions for use of filters
and self-contained breathing apparatuses used with the mask. In case of contact with
lubricants and oil by-products, solvents, oxidizing agents, acetates, hydrogen peroxide,
acids and strong bases, wash and clean the mask afterwards as soon as possible in
accordance with paragraph 7.2.
2.1

Specific usage

When the hazards potentially present in the workplace call for respiratory system
protection and use of protective equipment, the compatibility of these devices with the
mask must be carefully tested. These additional protection measures must not jeopardize
the full effectiveness of the respiratory protective equipment.
The hazards potentially present in the workplace can be the following:
− Liquid or gaseous substances which are harmful in contact with skin
− Toxic substances which are irritating to skin
− Radiations
− Mechanical stress
− Explosions in the atmosphere
− Oxygen-enriched atmosphere
D.P.I. s.r.l. technical services are at your disposal for any assistance, explanation, advice
or information you might need.
(4333.0615)
DEKRA EXAM (ex DTM)
(4333.3035)
Essen - Germany
(4333.2043)
(Notified Body n. 0158)
(4333.0608)
(4333.2030)
(4333.2035)
20

Publicité

Table des Matières
loading

Table des Matières