Scheppach HP1400S Traduction Des Instructions D'origine page 20

1.
scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
new machine.
manufacturer of this device shall not be responsi-
ble for damage to and from this device which results
from:
• Improper care
• Non-compliance with the Operating Instructions
•
•
original spare parts
• Improper use and application
Read through the complete text in the operating in-
structions before installing and commissioning the
device.
The operating instructions are intended to help the
user to become familiar with the machine and take
advantage of its application possibilities in accord-
ance with the recommendations.
The operating instructions contain important infor-
Keep the operating instructions package with the
machine at all times and store it in a plastic cover to
protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
cerning the operation of the machine and who are in-
formed about the associated dangers. The minimum
age requirement must be complied with.
operating manual and the particular instructions for
ulations for the operation of identical devices must
be complied with.
arise due to non-observance of these instructions
20 | GB
2.
1.
2. Eccentric
3. Drive
4. Motor
5. Gasoline tank
6.
7. Exhaust pipe
8. Lower handle
9. Upper handle
10. Gas lever
11. Carburettor exhaust *Depending on the version
3.
A
B Handle
C Wheel base
D Rubber mat with fastening bar
Small parts
Operating instructions
•
•
•
structions.
•
- dealer.
• When ordering, include our order numbers and the
-
m ATTENTION
-
-
-
www.scheppach.com
-
-