HanseLifter DSHT-05 Mode D'emploi page 83

Preface
Thank you for purchasing a HanseLifter® lift table.
This operating manual describes the correct use of the lift table. It contains instructions for safe use and shows
how the equipment is serviced correctly. This operating manual must be read and understood by all persons
that come into contact with the lift table (operators, service personnel, security officers, etc.). This is the only
way to utilise the full potential of the HanseLifter® lift table.
If you have any questions after reading this manual please contact your dealer, or contact us.
HanseLifter® – Straubinger Str. 20 – 28219 Bremen, Germany
It is possible that differences may occur between the descriptions and the parts installed in the lift table, as the
design and technology are subject to ongoing revision. Differences in installed parts can also arise on the basis
of special customer requirements. If this is the case, please contact us.
These operating instructions are part of the product. Retain them for later use.
Model and description
TASHT2t-05
TASHT4t-05
TASHT8t-05
TRSHT1t-05
TRSHT2t-05
DSHT1t-05
DSHT2t-05
DSHT4t-05
ALL RIGHTS RESERVED COPYRIGHT 09/2017
DSHT-05 series
Model
any kind of reproduction, even in parts, is not permitted.
Lifting capacity (in t)
2,0
4,0
8,0
1,0
2,0
1,0
2,0
4,0
UK
®
HanseLifter
Page 2 of 16