Electrical Safety; Pan Placement - LG LRE6387ST Manuel Du Propriétaire

6
important safety instructions

ELECTRICAL SAFETY

y Protective Liners. Do not use aluminum foil or any other material to line the oven bottom.
Improper installation of these liners may result in a risk of electric shock or fire.
y Do Not allow aluminum foil or the temperature probe to contact heating elements.
y Before replacing your oven light bulb, switch off the electrical power to the oven at
the main fuse or circuit breaker panel. Failure to do so can result in severe personal injury,
death, or electrical shock.
warning
y Turn the POWER OFF before removing the warming oven drawer.
- Failure to do so can result in severe personal injury, death, or electrical shock.

PAN PLACEMENT

dEEP FAT FRYERS
y Use extreme caution when moving or disposing of hot grease.
y Always heat fat slowly, and watch while is getting heat.
y If frying combinations of oils and fats, stir together before heating.
y Use a deep fat thermometer, if possible, to prevent overheating fat beyond the smoking point.
y Use the less possible amount of fat for effective shallow or deep-fat frying. Filling the pan with
too much fat can cause spillovers when food is added.
y Do not place food or cookware on the bottom of the
oven cavity. Doing so will cause permanent damage to the
oven bottom finish.
y When cooking food in the warming drawer, always
use a baking sheet or pan with 4 raised sides. This will
prevent food from sliding off.