FISCHER 18092 Mode D'emploi page 28

Step 2
Preparing the rack for assembly, remove the base unit (1) from the guide
rails (3+4)
On delivery, the base unit (1) is inserted
into the guide rollers to protect the guide
rollers (1c+1d). Before being mounted to the
vehicle, the base unit and guide rails must be
separated.
1. Loosen the hand wheel (1f) left and right (do
not screw off completely!)
2. Push the guide rails (3+4) back until the front
guide roller (1c) hits the opening in the rail
and projects from the opening.
3. Push the guide rails (3+4) further back until
the back guide roller (1d) hits the opening
in the rail and base unit projects from the
opening.
2
28
18092_Betriebsanleitung_D_GB_F_IT_PL.indd 28
1
3
3
4
1f
push
13.02.15 11:25