General Preliminary Information - FISCHER 18092 Mode D'emploi

5. General preliminary information

Step 1
base support – Prerequisite for proper functioning of the roof lift bike rack
The base support must first be mounted to the
vehicle roof.
Please observe the following!
Both carrying bars must be mounted parallel
to one another and at the same distance.
With many vehicles, the mounting position
is predetermined by the manufacturer and
indicated by markings.
Vehicles with a rain gutter or roof rails do not
have any set mounting position predetermined
by the manufacturer. In this case, the bar
distance should be at least 70 cm and not
exceed 87 cm.
18092_Betriebsanleitung_D_GB_F_IT_PL.indd 27
The carrying unit can be moved forward and
backward in the guide rails (3+4).
3
1
base support
note: Use a tape measure to check the
distance between bars.
Distance at least 70 cm, max. 87 cm
IMPORTAnT! Mount carrying bars
parallel to one another and at the
same distance.
4
2
27
13.02.15 11:25