General Information - TWIST be cool Instructions

GB
TWIST - GROUP 0+1 ISOFIX 0 - 18 KG
USING THE BE COOL TWIST CHILD CAR SEAT
Thank you for purchasing our car seat BE
COOL TWIST. The product is manufactured
under strict quality control conditions. Its op-
timum safety characteristics are only effective
if the seat it used correctly.
As a result you should ensure strict adherence
with the mounting and usage instructions.
The BE COOL TWIST is suitable for children up to
the age of approx. 4 or up to 18kg. It is suitable
for use in vehicle with Isofix-approved seats (see
vehicle list) in accordance with the relevant child
restraint and anchoring category.
As a result of accident statistics, however, we
recommend using the seat behind the front
passenger seat.
The seat consists of 2 parts: the seat (A) and
Isofix base (B).

GENERAL INFORMATION

• This is an Isofix child restraint. It has been
approved for general use in vehicle equipped
with Isofix anchoring in compliance with ECE
regulation 44.04.
• It is suitable for use in vehicle with Isofix-
approved seats (see vehicle list) accordance
with the relevant child restraint and anchoring
category.
• This child safety restraint is compliant with
the Isofix weight category: up to 18kg and Iso-
fix size categoris: D and B1.
• If you have any questions or doubts, please
contact the manufacturer of the child safety
unit or your retailer.
ISO- FIX
FOR
The BE COOL TWIST with Isofix system has
been approved for semi-universal's use, and is
suitable for mounting on specific vehicle seats.
The appendix VEHICLE LIST contains an over-
view of vehicles and vehicle seats that have
been approved for using the TWIST with Isofix
system in connection with a support leg.
Should your vehicle not be listed, please en-
sure that the TWIST can be properly mounted
in your car / on the desired seat before you
purchase the child seat.
Read the user manual provided by the manu-
facturer of your vehicle and the mounting and
security instructions contained in this user
32
manual.
SUITABLE VEHICLES
1 REMOVING THE SEAT
The seat (A) of TWIST can be re moved from
the Isofix-Basis (B).
Always remove the child first before removing
the seat!
The Locking Handle is located underneath the
seat and on the fr ont top of the Isofix base.
Pull the Locking Handle forwards, as you can
see the front lock unlocks the metal tube on
the front of seat.
Unlock the Rear-lock as photo shows, and lift
the seat up and take it off from the base.
2 MOUNTING THE TWIST
To make mounting easier, we recommend to
mount the Isofix base first, then to lock the
seat to Isofix base .
Always mount and remove the TWIST without
a child in it!
Step 1 Mount the Isofix base
Rotate the Isofix system control dial on the
front of Isofix base to the anti-clock wise di-
rection, so you can see the Isofix connector
moved outwards until it fully extended.
Place the Isofix base in the driving direction
on a vehicle seat equipped with Isofix anchors.
Push the Isofix connectors towards the Isofix
anchors on the vehicle seat until you hear a
"Click" and see the safety display on both
sides of the Isofix connectors show GREEN.
Lock the seat shell to the Isofix base.
Depending on the age of the child, then de-
cide to lock the seat in rearward position
(Birth to 18kg) or forward position (9 to 18kg).
CAUTION!
Do not use on seats with airbags. Danger to
life!
Always mount the seat without a child in it.
Step 2.1 Locking the seat to the Isofix base in
REARWARD POSITION:
Birth-18kg
a) Lifting the seat, lock the metal tube in the
underneath of the front side of the to lock into
the REAR-LOCK on Isofix base.
b) Pull the LOCKING-HANDLE forward, and
push the back edge of the seat downwards,
and lock the metal tube in the underneath of
the rear side of the seat to lock into FRONT-
LOCK on Isofix base.
c) Release the LOCKING-HANDLE, and lock
the metal tube in the rear side, make sure you